MasterCraft X-15 Installationshandbuch PDF herunterladen (Seite 21)

Installaon manual and user guide MasterCra / Holland Marine Parts 21

7: Outside of vessel:

Flange treaded nozzle: In case of an rough or not enre at surface: Apply sealant for marime

purposes: Sikaex-291i / 3M 5200 adhesive / sealant on the side of the ange of the nozzle that

contacts the vessel plang.

In case of a smooth and at surface: Apply the provided rubber seal.

Do not use addional sealant in combinaon with the rubber seal.

Inside vessel:

Place the PVC guide ring, white nylon ring and the 2” nut, apply sealant. Tightly fasten the nut.

Make sure the nozzle remains horizontal and in 90˚ heart line of the vessel.

Connect the ball valve, 45˚ elbow and the hose connector. All connecons are BSP treaded.

Apply Sealant for marime purposes: e.g. Sikaex-291i / 3M 5200 adhesive / sealant at every

tread to connect and seal the parts.

Do NOT use teon tape!

8: Thoroughly clean and degrease every tread that has to be connected. Make sure to use

sucient sealant on the tread. At least 6 threads and smoothen with e.g. nger over enre

thread. Apply sealant on both parts that have to be installed. Remove spilled sealant immedi-

ately. Use acetone to remove Sikaex-291i stains.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

MasterCraft X-15 Installationshandbuch Seite 21